• Assembled vapour-smoothed Build Kit hero image for Grimdark: Terminus Siege Helm
1 1

Grimdark: Terminus Siege Helm

Grimdark: Terminus Siege Helm

Not an officially licensed Grimdark product.

$209.95 AUD
$209.95 AUD
Sale Sold out
Shipping calculated at checkout.
Build KitIntermediate4-6 hrs assemblyFinishing requiredDigital guides included

Built to get you to the rewarding part faster. Builders ordinarily see around an 80% reduction in sanding and prep time compared with a raw untreated print. Larger sections are pre-assembled on multi-part builds to reduce assembly, and large visible surfaces are vapour smoothed where practical to cut sanding, filler, and ugly early prep before primer.

Detailed digital assembly and style guides are included after purchase.

Builder-first prop kit with dramatically less sanding and prep, pre-assembled larger sections on multi-part builds, vapour smoothing where practical, and clearer guidance so you can get to paint faster.

Printed to order and typically dispatched within 7 days once the full kit set is ready.
Build details ▾
Detailed digital assembly and style guides are included after purchase.
Built to get you to the rewarding part faster. Builders ordinarily see around an 80% reduction in sanding and prep time compared with a raw untreated print. Larger sections are pre-assembled on multi-part builds to reduce assembly, and large visible surfaces are vapour smoothed where practical to cut sanding, filler, and ugly early prep before primer.
This builder kit is designed to remove as much hard work and guesswork as practical before the rewarding part begins. Builders ordinarily see around an 80% reduction in sanding and prep time compared with a raw untreated print. On multi-part builds, larger sections are pre-assembled to reduce assembly time. Large visible surfaces are vapour smoothed where practical to cut sanding and filler before primer, while assembly, final fitment where needed, paint, and detailing remain on the buyer.
Printed to order and typically dispatched within 7 days once the full kit set is ready.
You receive a much cleaner starting surface than a raw untreated print, but final primer, paint, and detailing are still part of the builder process.
Included in kit
  • Printed ABS components
  • Pre-assembled larger sections on multi-part builds
  • Detailed digital assembly and style guides
You need
  • Adhesive for final joining where needed
  • Primer and paint
  • Minor filler if desired
  • Final detailing supplies
Tools required
  • Sandpaper
  • Cleanup tools
  • Clamps or tape for dry fitting
  • Primer and paint tools
Finishing time
8-12 hours

DIY Kit Includes

  • Durable ABS Components
  • Acetone Vapour Smoothed
  • QA Tested

Product Description

Grimdark: Terminus Siege Helm is built to take as much of the hard work and guesswork out of your build as practical so you can get to assembly, primer, and paint faster.

Builders ordinarily see around an 80% reduction in sanding and prep time compared with a raw untreated print. On multi-part builds, larger sections are pre-assembled to reduce the amount of assembly. Large visible surfaces are vapour smoothed where practical to cut sanding, filler, and ugly early prep before primer.

This is still a builder product. You keep the rewarding part: assembly, final fitment where needed, primer, paint, and detailing.

Detailed digital assembly and style guides are included after purchase, with recommended paints and clear guidance to reduce trial and error.

Grimdark: Terminus Siege Helm is a finished display piece for customers who want the prop without the builder labour.

Assembly, surface prep, paint, and presentation are handled in-house so the piece arrives much closer to the final result shown on the page.

This is not a builder kit. The value is in the finished object rather than the build process.

Grimdark Terminus Siege Helm

An elite boarding-suit war-mask for cosplayers, collectors and videographers who want the unstoppable look of heavy sci-fantasy commandos

When veteran crusaders step into the Terminus Siege Helm they become a walking bunker. Thick inter-locking shell segments, deep-set ocular housings and a reinforced vox-grille echo the legends of ancient void-strike armour: sealed for hard vacuum, braced to shrug off autocannon fire, and rigged for blink-insert teleport assaults. The helm’s broad brow carries a four-point honour stud, a respectful nod to the mythical Crux reliquary worn only by the most decorated heavy infantry. 

(Disclaimer: Prop only – not ballistic or safety equipment. Props & Pixels is not affiliated with Games Workshop or any of its subsidiaries.)

💡 Upgrade Options

  1. COB-LED “Siege Eyes” Kit
    Pre-wired ice-blue or infernal-red COB strips behind each lens, USB-C rechargeable pack, in-line brightness dial
  2. Vox Mod Suite    GRN-200 voice changer with selectable filters (Gravel, Vox-Bark, Servo-Whisper) & gain control, 4 h rechargeable power cell
  3. Twin-Fan Vent Core    Low-noise exhaust fans hidden behind lower grille, keeps visor fog-free; USB-C charging
  4. Ultimate Breach Bundle  
    All three upgrades above + custom “siege-scarring” paint pass (burn marks, shrapnel scoring)

📏 Dimensions & Weight

  • Length: 34 cm 
  • Width: 30 cm 
  • Height: 29 cm
  • Weight (finished): ≈ 1.4 kg
View full details

Shipping

Carefully packaged to ensure all components arrive safely. International shipping available (customs fees may apply).

Customer Support

If you have any questions during assembly, feel free to contact us for assistance.

Can't find what you're after?

More often than not, we can source the model or design you're looking for through our network of trusted designers. If you have a custom request for one of our existing products, feel free to reach out, and we'll be happy to make modifications to suit your needs.

Safety and Legal

Safety Disclaimer:
This replica is intended for display and cosplay purposes only. It is not a functional piece of protective equipment and should be handled responsibly. This is not a real firearm, protective item or weapon and should be treated the same.

Legal Disclaimer & Intellectual Property Notice:

Please be advised that this product is a fan-made artistic reproduction, created as a replica prop for private, non-commercial use (e.g., collection, cosplay, or display). This item is not, and should not be considered, an officially licensed product.

Props and Pixels is not affiliated, associated, authorized, or endorsed by, nor in any way officially connected with, the holders of the original intellectual property rights or any of their subsidiaries or affiliates. All copyrights, trademarks, and other intellectual property rights related to the source material are the exclusive property of their respective owners.

The naming of any characters, brands, or other protected properties is used solely for descriptive purposes and does not imply any affiliation with or endorsement by the IP holders. We explicitly disclaim any ownership of or reliance upon these trademarks and copyrights.

If you have any concerns regarding potential intellectual property infringement, please contact us directly at hello@propsandpixels.co for immediate review and resolution.

Bulk or Custom orders

Contact us for special pricing on bulk orders, group purchases, or bespoke customisation requests.